Table of Contents
Advertisement
4.
Attach the wire for cap with the screw (B3 x 8 (black)).
Optical connector block (LEMO)
5.
Connect the harness to the connector (CN001) on the PS-904A board.
6.
Push the ground line against the left side of the boss and fasten it with a screw.
CN001
HXC-FB75H/HXC-FB75KC
Harness
3 x 8
Wire for cap
B3 x 8 (Black)
B3 x 8 (Black)
PS-904A board
Ground line
Boss
5-3
Advertisement
Table of Contents
