Table of Contents
Advertisement
2.
Remove the PS-904A board.
(1) Remove the two screws, and remove the PS shield sheet.
Note
When attaching the PS shield sheet, insert the projection into the hole in the main chassis.
(2) Remove the two screws, and remove the PS-904A board.
Boss
Note
When installing the PS-904A board, align the boss with the hole of the PS-904A board.
3.
Install the removed parts by reversing the steps of removal.
HXC-FB75H/HXC-FB75KC
Hole
PS-904A board
Hole of the main chassis
Hole
PSW3 x 8
PS shield sheet
Projection
PSW3 x 8
4-26
Advertisement
Table of Contents
