Table of Contents
Advertisement
Displaying the SERVICE menu.
1.
Turn the DISPLAY/MENU switch to the MENU side while pressing the the menu control knob.
[TOP] appears at the upper right of the screen of viewfinder and the screen of the monitor connected to TEST OUT
connector or SDI OUT connector (by setting CHARACTER to ON).
2.
Set the cursor at [AUTO SETUP] on MAINTENANCE menu and press the the menu control knob for at least 10
seconds.
The cursor shifts to [AUTO BLACK].
3.
Set the DISPLAY/MENU switch to OFF, and then turn the switch to the MENU side again.
The SERVICE menu is displayed.
Changing Setting Values
• Select a menu item by turning the the menu control knob and it is entered by pressing the the menu control knob.
• For items whose values can be modified by turning the the menu control knob, set values can be entered or
suspended by the following operations.
To enter:
Press the the menu control knob.
To suspend:
Set the DISPLAY/MENU switch to OFF.
To restart the setting operation, turn the DISPLAY/MENU switch to the MENU side again.
Exiting menu
Set the DISPLAY/MENU switch to OFF.
HXC-FB75H/HXC-FB75KC
6-5
Advertisement
Table of Contents
