Sony HXC-FB75H Service Manual page 64

3. Disconnect the harnesses and fine-wire coaxial cables.
(1) Release the fine-wire coaxial cable (yellow), fine-wire coaxial cable (red) and two harnesses from the clamper.
(2) Disconnect the two harnesses from the connector (CN102, CN302) on the IF-1306 board.
(3) Disconnect the three fine-wire coaxial cables from the three connectors (CN200[R], CN201[G], CN202[B])
on the DPR-373 board.
Note
When connecting the fine-wire coaxial cables, pay attention as follows.
• Set the fine-wire coaxial cables with attention color of cables.
• Connect them in the following sequence: Blue, Yellow, Red.
HXC-FB75H/HXC-FB75KC
CN201[G] CN202[B]
CN200[R]
Clamper
DPR-373 board
IF-1306 board
Fine-wire coaxial cable (Yellow)
Fine-wire coaxial cable (Blue)
Fine-wire coaxial cable (Red)
CN102
CN302
Harnesses
4-20