Siemens SIMOTION D4 Series Manual page 69

Integrated drive control
Table 4- 9
Data
Max. number of axes for
integrated drive control
(servo/vector/
Communication
Table 4- 10
Data
DRIVE-CLiQ interfaces
Ethernet interfaces
PROFIBUS interfaces
PROFINET interfaces
1)
2)
Address space
Table 4- 11
Address space
Logical I/O address space in KB
Physical I/O address space in KB


Permanent process image for
BackgroundTask (I/O variables)
Additional configurable process image for
each cyclic task (I/O variables)
Address space for each PROFIBUS DP
station
SIMOTION D4x5-2
Manual, 11/2010
Controls for integrated drives
V f
/ )
Interfaces
1)
2)
Supports PROFIBUS DP, isochronous, can be configured either as master or slave
Supports PROFINET IO with IRT and RT, can be configured as PROFINET IO controller and/or
device
Address space
PROFIBUS (for each interface): Max.
for inputs and outputs respectively:
PROFINET: Max. for inputs and
outputs respectively:
SIMOTION D445-2 DP/PN
6 / 6 / 12 (alternative) Drive
control based on CU320-2,
firmware version 4.x
SIMOTION D445-2 DP/PN
6
2
2
1 interface with 3 ports,
onboard
SIMOTION D445-2 DP/PN
16 KB
1 Kbyte
 1)
4 KB
 1)
64 bytes
Yes
244 bytes
Technical data of the D4x5-2
4.5 Interfaces and performance features
SIMOTION D455-2 DP/PN
6 / 6 / 12 (alternative) Drive
control based on CU320-2,
firmware version 4.x
SIMOTION D455-2 DP/PN
6
2
2
1 interface with 3 ports, onboard
SIMOTION D455-2 DP/PN
16 KB
1 Kbyte

4 KB

64 bytes
Yes
244 bytes
1)
1)
69