Table of Contents
Advertisement
REF 580-1000-01 Y
Attaching Manifold Support without Cord Storage Bracket
7. Attach the manifold support bracket to the cart by lining up the holes
against the bottom of the cart. Make sure the arm of the bracket
angles upward. Use the 3/8 inch long cap screws that come with the
Oxygen Manifold kit. See Figure 13-7.
The wall O
connection of the manifold fits snugly into the manifold
2
support bracket grommet.
Figure 13-7: Attaching Manifold Support Bracket
8. If you will be using O
hoses from the O
manifold assembly. These inlets are marked "O
Figure 13-8: Completed Manifold Assembly
Esprit® Ventilator Operator's Manual © Respironics, Inc.
cylinders, connect either or both of the oxygen
2
cylinders to the left and right inlets of the oxygen
2
Chapter 13
Oxygen Manifold Option
Manifold Support Bracket
3/8" Screws
Cylinder".
2
13-27
Advertisement
Table of Contents
