Alarm Testing Procedure; Where To Go For Help - Respironics ESPRIT Operator's Manual

Chapter 8
Operating Instructions
Alarm Testing
Procedure

Where To Go For Help

8-32
Date set
Time set
10. Once you have reviewed all the parameters on the User Config screen,
the ventilator is ready for patient use. Turn the ventilator off, then on,
without holding down any front panel keys.
11. Ventilator settings from the previous use are in effect at power up.
Select appropriate settings for the next patient as described in this
chapter.
A procedure is available if the operator wants to test the operation of alarms.
Respironics recommends following the preoperational procedure. (Refer to C,

"Alarm Testing Procedure".)

For clinical or technical support, contact Respironics Customer Service at
1-800-345-6443.
Esprit® Ventilator Operator's Manual © Respironics, Inc.
Figure 8-35: User Config Screen
Altitude set
Compliance
compensation
enable/disable
Time format (12 or
24_hour) set
Backup Battery
(confirm at startup)
enable/disable
REF 580-1000-01 Y