Install And Set Up - NETGEAR PS104 Installation Manual

5

Install and Set Up

If you are using Windows 95, Windows 98, or Windows NT, this section
provides you with information about how to set up each Windows PC so that it
can recognize the print server.
Before proceeding with these instructions, make sure you have assigned a name
to your workgroup on your PC.
Note: Installation and setup of the NETGEAR software is required on
each PC needing access to the printers that will be attached to the print
server.
Install the FirstGear for Print Server: Windows User
FirstGear, a software program used with NETGEAR products for quick and
easy installation, is provided on the CD-ROM included in your package
contents.
To install FirstGear on your PC:
1. Turn the power on to your PC.
2. Insert the NETGEAR Resource CD-ROM.
3. The installation process will start with the display of the NETGEAR
window. If it does not, click on Start > Run >
and type in "Install.exe" at the prompt (for example, "D:Install.exe") to
start the installation process.
4. Click on "Next" when the FirstGear window opens.
5. Choose "User PC Installation," and click on "Next."
Note: NETGEAR strongly recommends that you exit all Windows
programs before running the Setup program.
6. Click on "Next" when the "NETGEAR Print Server Software
Installation" window opens.
7. Click on "Next" to install the NETGEAR Print Server program in the
Program Files folder.
8. Click on "Next" to title the program folder "FirstGear for Print
Server" (the default name). You may also type in a unique name for the
print server folder.
Verify that the information on the screen is correct.
9. Click on "Finish" when the "Setup Complete" window opens.
The FirstGear Print Server Program is now installed on your PC.
Model PS104/PS105/PS110 Print Server Installation Guide