Start Here - NETGEAR PS104 Installation Manual

Start Here

Instructions in this guide are for users with the following:
®
• Microsoft Windows
• A network card installed with the NetBEUI protocol
All other users must refer to Installation and Reference for the Model PS104/
PS105/PS110 Printer Server on the PS100 Series Print Server Resource CD for
complete hardware and software installation instructions.
If you have not yet installed network cards in your PCs, you can use the Model
FA310 network card, a NETGEAR
a network, you can use the Model DB104 10/100 Mbps Fast Ethernet Network
Starter Kit or the Model SB104 10 Mbps Starter Kit, also NETGEAR products.
Features
The Model PS104, Model PS105, or Model PS110 print server has these
features:
• Support for NetBEUI, TCP/IP, and IPX/SPX protocols and Windows 95,
Windows 98, Windows NT, Novell NetWare, and UNIX operating systems
• Autosensing 10/100 megabit per second (Mbps) port for 10BASE-T and
100BASE-T Ethernet connections (Model PS110 only)
• Built-in 4-port and 5-port hub functionality (Model PS104: four 10BASE-T
ports; Model PS105: four 10BASE-T ports and one BNC port)
™
• FirstGear software program developed by NETGEAR, which enables easy
configuration of the print server for Windows 95, Windows 98, and
Windows NT users operating on a Microsoft network
• Compact size that allows the print server to be used where space is limited
and to be mounted with Velcro on the side of a printer
• Flash EPROM upgradability
• Extensive LED indicators for at-a-glance status
Model PS104/PS105/PS110 Print Server Installation Guide
®
95, Windows 98, or Windows NT
™
product. Additionally, if you want to set up
®