Sloped Pool Floor; Robot Doesn't Climb Slope; Robot Drives The Width Of Slope - Maytronics Dolphin Wave 200XL Troubleshooting Manual

Dolphin Wave 200XL and 300XL Pool Troubleshooting Guide
5.2

Sloped Pool Floor

If the robot works "Down the slope," change the scanning direction to
1
"Up the slope." (Wave 300 only)
Change the line spacing to Medium or Fine (see change the line
2
spacing to medium
6

Robot Doesn't Climb Slope

➣ In this chapter...

Robot Drives the Width of Slope

6.1 Robot Drives the Width of Slope
Clean the filter (see wave 200XL filter cleaning
1
filter cleaning
For pools with a diving area, split the pool into two cleaning sections
2
(Pool A and Pool B).
Robot Drives the Width of Slope
"Down the slope"
Video and change the line spacing to Fine Video).
Video ).
"Up the slope"
page 5
Video or wave 300XL
5