Shaped Pool (No Rectangular Walls); Dirt Near Pool Wall; Robot Doesn't Pick Up Dirt; Blocked Filter - Maytronics Dolphin Wave 200XL Troubleshooting Manual

Dolphin Wave 200XL and 300XL Pool Troubleshooting Guide
7.5

Shaped Pool (No Rectangular Walls)

Change the cleaning mode to "Maze scanning" and extend the cycle time
(see change the cleaning mode to "Maze scanning" Video).
7.6

Dirt Near Pool Wall

Change the cleaning mode to "Crisscross" or clean the specific area via
remote control (see change the cleaning mode to "Crisscross" Video).
8

Robot Doesn't Pick Up Dirt

➣ In this chapter...
Blocked

Sand in Pool

Leaves in Pool

Worn Vacuum Strips
8.1

Blocked Filter

Clean the filter (make sure to wash it properly) (see wave 200XL filter
cleaning
8.2 Sand in Pool
Change the fine filter to 100 microns in wave 200XL.
Change the fine filter to 150 microns in wave 300XL.
8.3 Leaves in Pool
Remove the net spiral filter and use the cartridge only. (Wave 200XL
only)
Change the fine filter to 150 microns. (Wave 300XL only)
Leaves in Pool
Video or wave 300XL filter cleaning Video).
page 7
page 7
page 7
page 8
7