Dolphin Wave 200XL and 300XL Pool Troubleshooting Guide
4
Not Enough Space between Lines
➣ In this chapter...
Flat Pool Floor
Sloped Pool
4.1
Flat Pool Floor
If the pool floor is flat and is not enough space between the lines, change
the line spacing to Medium or Coarse (see change the line spacing to
medium
Video
4.2
Sloped Pool Floor
If the robot works "Up the slope", change the scanning direction to
1
"Down the slope." (Wave 300 only)
Change the line spacing to Medium or Coarse (see change the line
2
spacing to medium
Video).
5
Too Much Space between Lines
➣ In this chapter...
Flat Pool Floor
Sloped Pool
5.1
Flat Pool Floor
If the pool floor is flat and there is too much space between the lines,
change the line spacing to Medium or Fine (see change the line spacing
to medium
Flat Pool Floor
and change the line spacing to Coarse Video).
"Up the slope"
Video
and change the line spacing to Coarse
Video
and change the line spacing to Fine Video).
page 4
page 4
"Down the slope"
page 4
page 5
4