Type Mgntdata - Siemens HG 3500 V4 Service Manual

gateways_14_hg3500v4.fm
HiPath Gateway HG 3500 V4 - Changing Parameters with AMO CGWB

TYPE MGNTDATA

14.8 TYPE MGNTDATA
128
The security concept is based on two mechanisms: When the features are
activated, HG 3500 sends a token in each signaling packet (consisting of a
password and key, defined in AMO CGWB), to authenticate itself to a receiving
HG3550V2 gateway.
In the AMO CGWB a time frame is set. By default, the difference between the time
stamp of an arriving H.323 signaling packet and the current time of the receiving
HG 3500 cannot exceed 10 seconds.
A time sever is thus required for this feature. If the gateways are in other time
zones, this must be set on the HG 3500 boards.
Generation
To activate the H.235 security feature on the board, you set the security flag using
the AMO ZANDE. This activates H.235 data in the AMO CGWB on the board.
CHANGE-ZANDE:ALLDATA,H235SEC=YES;
CHANGE-CGWB:MTYPE=CGW,LTU=<ltu no>,SLOT=<slot
no>,TYPE=H235DATA,
GLOBID1=<string>,GLOBID2=<string>,TIMEWIN=10,GLOBPW=<
number>;
Once you have activated the H.235 security feature with the AMO ZANDE, you
must reboot the board to activate the changes.
The branch TYPE=MGNTDATA is used to set up the connection to HiPath 4000
Assistant.This is among other things necessary for the auto restorefunction of the
HG 3500.
For trunking connections to HiPath 8000/OpenScape Voice the parameters
MGNTPN and BUSPN are important.
CHANGE-CGWB:MTYPE=MGNTDATA,MGNTIP=<ip-address
UW7>,MGNTPN=<port number of UW7>,BUSIP=<ip-address
UW7>,BUSPN=<port number of the backup server>;
This command sets up two IP addresses (+ports):
The first IP address MGNTIP designates the „Management Station". This is the
IP address under which the HiPath Assistant can be reached. This IP address is
important for the single login concept. Logging on to the HG 3500 via the HiPath
Assistant is only possible via this IP address.
HiPath 4000 V5, IP Solutions - HG 3500 & HG 3575, Service Documentation
A31003-H3150-S104-2-7620, 03/2009