Rohs; Environmental Type Tests - Siemens RUGGEDCOM WIN5151 Series Installation Manual

Hide thumbs Also See for RUGGEDCOM WIN5151 Series:
Table of Contents

Advertisement

Chapter 5
Certification
Section 5.1.7

RoHS

This device is declared by Siemens Canada Ltd to meet the requirements of the following RoHS (Restriction of
Hazardous Substances) directives for the restricted use of certain hazardous substances in electrical and electronic
equipment:
• China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic Information Products
A copy of the Material Declaration is available online at
view/109738831.
Section 5.2

Environmental Type Tests

The RUGGEDCOM WIN5151 has passed the following environmental tests.
Test
IEC 60068-2-1
IEC 60068-2-2
IEC 60068-2-11
MIL-STD-810F 509.4
IEC 60068-2-14
IEC 60068-2-18
IEC 529 (IP65/IP67)
IEC 60068-2-6
IEC 60068-2-64
38
Description
Low Temperature
High Temperature
Salt Fog
Temperature Change
Water (Rain, Intensity)
Water (Rain)
Sine Vibration
Random Vibration (Class 4M5)
Random Vibration
https://support.industry.siemens.com/cs/ww/en/
-25 °C for 72 hours
-40 °C (-40 °F) for 16 hours
-40 °C (-40 °F) for 72 hours
55 °C (131 °F) for 72 hours
60 °C (140 °F) for 16 hours
70 °C (158 °F) for 72 hours
-10 to 45 °C (14 to 113 °F) @ 0.5 °C/min (0.9 °F/min) for 2 cycles
-40 to -30 °C (-40 to -22 °F) @ 1 °C/min (1.8 °F/min) for 5 cycles
0.01 m³/min (0.35 ft³/min @ 90 kPa (13 PSI) for 30 minutes
0.01 m³/min @ 90 kPa (13 PSI) for 15 minutes
Displacement: 1.5 mm
Acceleration: 2 m/s²
Frequency Range: 5 to 62 Hz, 62 to 200 Hz
Duration: 3x5 sweep
Frequency Range: 5 to 10 Hz, 10 to 50, 50 to 100 Hz
3 axes, 30 min per axes
Frequency Range: 5 to 20 Hz, 20 to 200 Hz
3 axes, 30 min per axes
RUGGEDCOM WIN5151
Installation Guide
Test Levels
5% NaCI 35° 48h
Velocity: 5 mm/s
3 Axes
ASD: 0.04 m²/s³
12 to 12 dB/oct
ASD: 1 m²/s³
-3 dB/oct
RoHS

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ruggedcom win5151-acRuggedcom win5151-dc

Table of Contents