Table of Contents
Advertisement
gateways_15_codec.fm
Codec Settings
IPDA
15.2 IPDA
134
CHANGE-
STMIB:MTYPE=NCUI2,LTU=17,TYPE=ASC,PRIO=PRIO3,CODEC=G729AB,VAD
=YES,RTP="40";
CHANGE-
STMIB:MTYPE=NCUI2,LTU=17,TYPE=ASC,PRIO=PRIO4,CODEC=G729B,VAD=
YES,RTP="20";
CHA-STMIB:MTYPE=NCUI2,LTU=17,TYPE=ASC,PRIO=PRIO5,CODEC=NONE;
CHA-STMIB:MTYPE=NCUI2,LTU=17,TYPE=ASC,PRIO=PRIO6,CODEC=NONE;
CHA-STMIB:MTYPE=NCUI2,LTU=17,TYPE=ASC,PRIO=PRIO7,CODEC=NONE;
For IPDA, the codecs for the master connection are switched by DNIL and
configured in AMO SDAT / AMO TDCSU, etc., i.e. in the user/trunk data of the
affected devices (see IP Distributed Architecture (IPDA) and Access Point
Emergency (APE),
Section 4.9, "Configuring Subscriber, CO/Tie Trunk Circuits in
Access
Points").
IMPORTANT: This means that the codecs do not need to be configured in the
AMOs CGWB and STMIB for the IPDA master connection.
For IPDA connections, the codecs are configured as previously described in the
AMOs STMIB or CGWB (see also
List for DMC Connections, RTP Packet Size, Voice Activity Detection and T.38
Fax"
and
Section 14.2, "TYPE ASC - Setting the Codec List for DMC
Connections, RTP Packet Size, and Voice Activity
HiPath 4000 V5, IP Solutions - HG 3500 & HG 3575, Service Documentation
Section 12.5, "TYPE ASC - Setting the Codec
Detection").
A31003-H3150-S104-2-7620, 03/2009
Advertisement
Table of Contents
