Type Asc - Setting The Codec List For Dmc Connections, Rtp Packet Size, And Voice Activity Detection; Type Dmcdata - Changing The Hg 3500 Setting To Support Direct Media Connections - Siemens HG 3500 V4 Service Manual

Hipath 4000 v5 gateways
Table of Contents

Advertisement

gateways_14_hg3500v4.fm
HiPath Gateway HG 3500 V4 - Changing Parameters with AMO CGWB

TYPE ASC - Setting the Codec List for DMC Connections, RTP Packet Size, and Voice Activity Detection

14.2 TYPE ASC - Setting the Codec List for DMC Connections, RTP Packet
Size, and Voice Activity Detection
14.3 TYPE DMCDATA - Changing the HG 3500 Setting to Support Direct
Media Connections
124
Configuration Management --> System Data --> IPDA --> IPDA System
Data
Enter settings under Payload Connections on the System Data tab and
click Save.
CHANGE-CGWB:MTYPE=CGW,LTU=5,SLOT=91,TYPE=ASC,TOSPL=16;
This change is loaded directly to the board and is effective immediately without
interrupting operation.
See also
Chapter 14, "Codec
This branches' parameters only apply to one HiPath HG 3500 board. Therefore
each HG 3500 board could be configured differently in a HiPath 4000 system.
To ensure the usability and the correct diagnosis of the system, these parameters
must have identical settings (FUNCTION=HG3570) for all HG 3500 boards.
In the example, the audio sample size for G.711 and G.729 is set to 60 ms for the
common gateway HG 3500 1-5-91. This results in a higher packeting delay, but
a comparatively low transmission bandwidth requirement.
Configuration Management --> System Data --> Board --> Board
Click Search and select STMI.
Set the times for G.711 and G.729 on the STMI Board Data tab and click
Save.
CHANGE-
CGWB:MTYPE=CGW,LTU=5,SLOT=91,TYPE=ASC,PRIO=PRIO1,
CHNAGE-
CGWB:MTYPE=CGW,LTU=5,SLOT=91,TYPE=ASC,PRIO=PRIO2,
These changes are loaded directly to the HG 3500 and become effective
immediately without interrupting operation.
Use this parameter to set the number of simultaneous direct media connections
permitted on a certain HG 3500. The connections are counted both in the HiPath
4000 central system's software and on the board itself.
HiPath 4000 V5, IP Solutions - HG 3500 & HG 3575, Service Documentation
Settings".
CODEC=G711,RTP=60;
CODEC=G729,RTP=60;
A31003-H3150-S104-2-7620, 03/2009

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hg 3575 v4

Table of Contents