Table of Contents
Advertisement
Body and Implement Mounting Guidelines U500 North America
10.3 Chassis frame material
In case of frame extensions the quality and dimensions of the
extension material must be equivalent to the standard chassis
frame. The chassis frame material is E460 TM or E500 TM on
the Unimog U500 NA.
A 47.24 in / 1,200 mm long piece of factory frame material is
also available as a spare part (part-no.: A405 311 10 01) and
can be ordered at authorized Freightliner Unimog Dealers.
Dimensions without brackets are in [mm].
Dimensions in brackets are in [in].
Figure 10.4: Frame material: A405 311 10 01
August 2005
10.4 Rear cross member
The chassis frame of the Unimog must always be equipped
with a rear cross member, even in non-trailer use. Otherwise
the frame will be damaged.
10.5 Wheel chocks
The wheel chocks must be mounted without play in suitable
brackets. They must be easily accessible, secured against
loss and removable without risk of injury.
10.6 Mounting of implements
Drilling/welding is prohibited when mounting bodies or imple-
ments. Use additional brackets to mount the body/implement.
For further information, see Section 4.12.
Chassis frame modifications
Page 275 of 294
Advertisement
Table of Contents
