Pass-Through Plug - Unimog U500 Mounting Manuallines

Body and Implement Mounting Guidelines U500 North America
9.3.3

Pass-through plug

The rubber part shown in Figure 9.6 should be used to facili-
tate cable passage into the cab. The cable passages at the
front and rear wall of the cab are equipped with this pass-
through plugs. The pass-through plug can also ordered at au-
thorized Freightliner
A405 583 00 83). The exact mounting position can be seen on
the previous sections and can also be determined with the ve-
hicle drawings on the Unimog Resource CD.
The fitted ports on the pass-through plug have four different
diameters, which can be cut so that different cable diameters
are possible. If the cable passage on the implement cable is
already converted, the two attached port plugs can be cut. If
the cable passage is connected on the existing cable, it can be
cut along the cable slits.
Figure 9.6: Pass-through plug for four different cable diame-
ters
Page 252 of 294
Unimog dealers (part-no.
Figure 9.7: Caps for pass-through plug
Cab
August 2005