Unimog U500 Mounting Manuallines page 256

Body and Implement Mounting Guidelines U500 North America
Figure 9.20: Dismounting of the interior light
Figure 9.21: Fastening of the roof-mounted front support
The front support shall be mounted via two bolts and a suitable
reinforcement plate. Additionally a seal must be attached be-
tween the front support and the roof of the cab. This seal can
August 2005
be ordered via the following part-no.: A381 811 04 96 at any
authorized Unimog dealership.
Figure 9.22: Mounting of the front support on the cab
Dimensions without brackets are in [mm].
Dimensions in brackets are in [in].
Figure 9.23: Reinforcement plate for the inside of the cab
Cab
Page 259 of
294