Rear Mounting Of Implements And Bodies - Unimog U500 Mounting Manuallines

Body and Implement Mounting Guidelines U500 North America

4.15 Rear mounting of implements and bodies

Rear frame mounting supports (code D50) for implement mounting
are available for the Unimog. They are friction-locked installed with
positive locking to the right and left in the longitudinal frame mem-
ber.
Code No.:
Right version:
D50 A405 552 01 18
Table 4.18: Part numbers of the rear mounting brackets (code D50)
Dimensions without brackets are in [mm].
Dimensions in brackets are in [in].
Figure 4.148: Drawing of the rear mounting bracket (code D50)
Page 166 of 294
Spare part number:
Left version:
A405 552 0118
The exact position of the rear mounting brackets can be determined
from the vehicle drawings on the Unimog Resource CD.
Implements or implement mounting frames can be quick-release fas-
tened to the rear mounting brackets (code D50) using bolts with a di-
ameter of 0.98 in / 25 mm. Heavy implements must additionally fas-
tened with plates to the left and right of each mounting bracket. The
hydraulic supply for rear-mounted implements can be provided via
rear connectors of the single/dual municipal hydraulic system or the
power hydraulic system of the Unimog. The electrical connection can
be provided via the implement socket near the battery unit (see Figure
7.10, page 228) or the rear trailer socket (see Figure 7.13, page 230).
Implements or counterweights must ensure that the two mounting
brackets have a balanced load in the event of longitudinal and vertical
acceleration.
The maximum rear implement weight in D50 mounting points (on road
use) is 3,300 lbs / 1,500 kg with a distance of 19.68 in / 500 mm from
the attachment points.
The maximum axle loads and the minimum front axle load must be
considered. Counterweights must not be positioned above the mount-
ing brackets.
In case of a quick release mounted rear crane that mounts in the rear
mounting brackets, the maximum crane torque must not exceed
25,324 lb⋅ft / 34.34 kNm (3.5 mt).
Implement / Body Installation
August 2005