SINTERIT LISA X Translation Of The Original User Manual page 18

IMPORTANT!
Do not use isopropyl alcohol to clean the laser protective glass.
5. Wipe the glass again on both sides with a dry cotton cloth.
6. Slide the metal tabs of the laser protective glass into the mounting brackets below the laser module.
7. Lock the laser protective glass in place by mounting and tightening the two quick release nuts.
8. Lift the heating module.
9. Reinsert the heating module safety pin.
1 2
4
6
Fig. 5.5 Mounting the laser protective glass.
3
LASER PROTECTIVE GLASS
5
7
%
Sinterit LISA X User Manual | 18