General Information; Intended Use; Operating Requirements - SINTERIT LISA X Translation Of The Original User Manual

3. General information

3.1 INTENDED USE

Sinterit Lisa X is a compact 3D printer, making use of the selective laser sintering (SLS) technology in additive manufacturing
(AM) processes. In its operation, it uses powdered polymers as the source material. The device enables professional and
quick manufacturing of physical 3D objects from their digital models. Improper use of the machine may be dangerous for
the operator and damage the machine.

3.2 OPERATING REQUIREMENTS

It is strongly recommended that the environment, where the machine will be installed and operated, match the criteria
listed below:
Condition
Air humidity
Storage conditions
Suggested air conditioning setting while the printer is in use
Optimal ambient temperature while the printer is in use
Ventilation
Minimum surface area of the working room
Minimum doorway width
Minimum room height
Minimum lighting requirement
It is additionally advised that a hygrometer (air humidity sensor) be installed in the immediate vicinity of the printer, in order
to enable monitoring and control.
IMPORTANT!
The room where the printer is operated needs to be well-ventilated, with stable air temperature and
humidity; kept relatively clean, ergonomic and arranged with an efficient workflow in mind.
ATTENTION!
The printer should not be placed directly next to an AC power source or air vents.
Value / Description
40-59 [%]
0-40 [°C] (32-104 [°F])
16-25 [°C] (61-77 [°F])
22 [°C] (72 [°F])
Min. 4 full air changes per hour
3.4 [m ] / 36.5 [ft²] with vacuum
2
5.4 [m ] / 58.1 [ft²] without vacuum
2
0.9 [m] / 2'11.5"
Min 2.4 [m]
500 [lx]
Sinterit LISA X User Manual | 10