Using The Digital Operator - YASKAWA VARISPEED-656RC5 Instruction Manual

1.3

USING THE DIGITAL OPERATOR

This section describes the component names and functions of the Digital Operator.
The component names and functions are shown in Fig. A-2 and Key function are de-
scribed in Table A-1.
DRIVE FWD REV
U1-02 =
DIGITAL OPERATOR
JVOP-130
LOCAL
REMOTE
JOG
FWD
REV
Fig. A-2
REMOTE
SEQ REF
Dc Bus Voltage
300 VDC
MENU ESC
DATA
ENTER
RESET
RUN STOP
Digital Operator Component Names and Functions
APPENDIX 1 OPTIONAL FUNCTIONS
Operation Mode Indicators
DRIVE : Lit when in operation mode.
FWD : Not used
REV : Not used
SEQ : Lit when the run command from the
control circuit terminal is enabled.
REF : Not used
Data Display
Two-line LCD that displays data for monitor-
ing, user constants, and set values with 16
characters per line.
Keys
Execute operations such as setting user
constants, monitoring, JOG, and autotuning.
51