Table of Contents
Advertisement
1
RECEIVING
1.1
INSPECTION CHECKPOINTS
Table 1
Fig.1 Nameplate Data
12
Do not install or operate any power regenerative unit which is damaged or
D
has missing parts.
Failure to observe this caution may result in personal injury or equipment
damage.
This chapter describes how to verify the VS-656RC5 after delivery to the user.
(1) Receiving Checkpoints
Checkpoints
Checkpoints
Does the power regenerative unit model number
correspond with the purchase order?
Are any parts damaged?
Is hardware properly seated and securely tightened?
If any of the above checkpoints are not satisfactory, contact your YASKAWA
representative.
(2) Checking the Nameplate Data
(a) Nameplate Data
Example of standard domestic model CIMR-R5U23P7
Power Regenerative
MODEL : CIMR-R5U23P7
Unit Model
INPUT
Input Spec.
Output Spec.
OUTPUT : DC 300 - 340V 13 A 1 min 25%ED
LOT No.
LOT NO :
Serial No.
SER NO.
CAUTION
Check the model number on the nameplate on the side of the
VS-656RC5. (Refer to page 13.)
Visually check the exterior and verify that there was no damage during
transport.
Remove the front cover of the power regenerative unit.
Check all visible hardware with appropriate tools.
: AC 3PH 200 - 220V 50HZ
200 - 230V 60HZ
YASKAWA ELECTRIC CORPORATION
Description
SPEC
: 23P71A
10 A
1 min
25%ED
MASS : 4.5 kg
M S
JAPAN
Mass
Advertisement
Table of Contents
