Uploading Initiated At A Service Terminal - Honeywell NOTIFIER FireWarden-100-2 Instruction Manual

Fire alarm control panel
Table of Contents

Advertisement

Uploading Initiated at a Service Terminal

6.3 Uploading Initiated at a Service Terminal
Items that may be uploaded from the control panel to a Service Terminal are:
• All programmed data plus the real-time clock, time and date
• Entire Walktest data file
• Troubleshoot Mode system voltages
• Entire event History file
• Current system status
Uploading is possible at any time provided the following conditions are true:
• The control panel must be in the Normal Mode of operation. Uploading is not possible if
the panel is in any other mode
• There cannot be any active communications ongoing with a Central Station receiver
• All active events must be successfully 'kissed-off' by the Central Station (the communicator
must be in a standby state with no new information waiting to be transmitted to a Central
Station)
Once an incoming call is accepted/answered by the control panel, the panel will:
1.
2.
3.
4.
5.
6.
7.
8.
9.
During the uploading process, the fire protection remains active. Should a system trouble or alarm
condition occur, the control panel immediately terminates uploading and processes the trouble or
alarm locally and transmits the information to the Central Station(s).
FireWarden 100-2/E — P/N 52778:A 11/04/2005
Establish basic modem connection
Verify secret code and panel identification number
Verify callback vs. no callback request from the service terminal. If callback is requested,
steps 4 through 9 will occur. If no callback is requested, only steps 8 and 9 will occur
Identify the Service Terminal location
Hang-up/disconnect call
Call the Central Station(s) and transmit a request for upload/download message (if
programmed to do so). If this message is accepted, the control panel will proceed to the
next step
Return call to Service Terminal
After security clearance, begin uploading
Upon completion of upload, call Central Station(s) back and report either a successful
upload or failed upload/download message (if programmed to do so).
Remote Site Upload/Download
157

Advertisement

Table of Contents
loading

This manual is also suitable for:

Notifier firewarden-100-2e

Table of Contents