Table of Contents
Advertisement
NOTICE TO USERS, INSTALLERS, AUTHORITIES HAVING JURISDICTION
This product incorporates field-programmable software. In order for the product to comply with the requirements in the
Standard for Control Units and Accessories for Fire Alarm Systems, UL 864, certain programming features or options must
be limited to specific values or not used at all as indicated below:
Program feature
Permitted in
or option
UL 864? (Y/N)
Trouble Call Limit
3.1 Programming Data Entry
Programming can be accomplished using the NFW2-100 keypad or by connecting an optional
standard computer keyboard. The keyboard can be connected to the PS-2 connector J3 on the
control panel main circuit board.
The information presented in this section refers to programming the NFW2-100 via the onboard
keypad. If an optional computer keyboard is connected to the NFW2-100 main circuit board, the
following table describes the keyboard keys which correspond to the onboard keypad keys.
FireWarden 100-2/E — P/N 52778:A 11/04/2005
Section 3: Programming
AND OTHER INVOLVED PARTIES
Refer to "Trouble Call Limit (Dialer Runaway Preven-
tion)" on page 99.
Trouble Call Limit = 0 (factory default): unlimited
N
calling to Central Station for any trouble condition
Trouble Call Limit = 1 - 99: limits call for each unique
trouble to from 1 to 99 within a 24 hour period
Keypad Keys
1st Event
CLR
ESC
RECALL
*
#
A - Z
0 - 9
(on QZ key)
—
/
•
ENTER
ACK/STEP
SILENCE
DRILL
RESET
Possible settings
Computer Keyboard Keys
Home
Delete
Esc
Insert
*
#
A - Z
0 - 9
Space bar
—
/
•
Enter
F1
F2
F3
F4
Settings permitted
in UL 864
Trouble Call Limit
= 0 for unlimited
Central Station
trouble calls
39
Advertisement
Table of Contents
