Honeywell NOTIFIER FireWarden-100-2 Instruction Manual page 95

Master Programming Level
Press 2 while viewing On Board DACT Screen #1 to program the type of primary phone line being
connected to the DACT. The following screen will be displayed:
To select the type, press 1 while viewing the Primary Phone Line screen. The following screen will
be displayed:
Press 1 to select Touchtone dialing, 2 to select Rotary dialing with a make/break ratio of 67/33 or 3
to select Rotary dialing with a make/break ratio of 62/38.
Press 3 while viewing On Board DACT Screen #1 to program the type of secondary phone line
ON BOARD DACT
being connected to the DACT. The following screen will be displayed:
1=ENABLED
2=PRIMARY PHONE
3=SECONDARY PHONE
On Board DACT Screen #1
To select the type, press 1 while viewing the Secondary Phone Line screen. The following screen
will be displayed:
Press 1 to select Touchtone dialing, 2 to select Rotary dialing with a make/break ratio of 67/33 or 3
to select Rotary dialing with a make/break ratio of 62/38.
FireWarden 100-2/E — P/N 52778:A 11/04/2005
Primary Phone
PRIMARY PHONE LINE
1=TYPE
1=TOUCHTONE
2=ROTARY 67/33
3=ROTARY 62/38
Secondary Phone
SECONDARY PHONE LINE
1=TYPE
1=TOUCHTONE
2=ROTARY 67/33
3=ROTARY 62/38
ON BOARD DACT
TOUCHTONE
Primary Phone Line Screen
PHONE LINE
Primary Phone Type Screen
ON BOARD DACT
TOUCHTONE
Secondary Phone Line Screen
PHONE LINE
Secondary Phone Type Screen
Programming
95