NETGEAR ProSafe FS728TP Software User Manual page 64

FS728TP Smart Switch Software User Manual
To define port security:
1. Click Switch > Security > Traffic > Port Security. The Port Security Page opens:
Figure 5-27
The Port Security Page contains the following fields:
– Interface – Displays the port or LAG name.
– Interface Status – Indicates the host status.
– Learning Mode – Defines the locked port type. The Learning Mode field is enabled only
if Locked is selected in the Set Port field. The possible field values are:
– Classic Lock – Locks the port, and only forwards packets that have been learned
statically or dynamically, prior to locking the port. The lock is effective immediately.
– Limited Dynamic Lock – Indicates the port is unlocked. Locks the port after a user-
defined number of MAC addresses have been dynamically learned on the port. After
the port is locked, packets are forwarded only from MAC addressees that have been
learned prior to locking the port.
5-31 Configuring the Device Using Your Browser
v2.0, November 2006