–
VLAN ID – Identifies a VLAN and contains information about the Multicast group
address.
–
VLAN Name – Displays the user defined VLAN name.
–
Bridge Multicast Address – Identifies the Multicast group MAC address/IP address.
–
Delete – The possible field values are:
–
Checked – Deletes the Vlan ID from the multicast group.
–
Unchecked – Maintains the list of Vlan IDS.
–
Interface – Ports that can be added to a Multicast service.
–
Interface Status – Indicates the Interface status. The possible field values are:
–
Static – The interface is statistically configured to the multicast group.
–
Forbidden – The interface is forbidden from joining the multicast group.
–
Excluded – The port is not a member of the multicast group.
The following table contains the IGMP port and LAG members management settings:
Table 7:
IGMP Port/LAG Members Table Control Settings
Port Control
Definition
S - Static
Attaches the port to the Multicast group as static member in the Static Row.
The port/LAG has joined the Multicast group statically in the Current Row.
F - Forbidden
Forbidden ports are not included the Multicast group, even if IGMP snooping designated the
port to join a Multicast group.
E - Excluded
Excluded. The port is not part of a Multicast group.
2. Click
. The Add Multicast Group Page opens:
Configuring the Device Using Your Browser
FS728TP Smart Switch Software User Manual
v2.0, November 2006
5-124