NETGEAR ProSafe FS728TP Software User Manual page 109

The IP Interface Page contains the following fields:
– Get Dynamic IP from DHCP Server – Retrieves the IP addresses using DHCP.
– Static IP Address– Displays the currently configured IP address. IP addresses are either
configured on the Default VLAN or are user-defined.
– IP Address –The IP Address is set manually.
– Subnet mask – Displays the currently configured IP address mask.
– Gateway – Defines the default gateway IP address. The following option is available:
– Delete – Removes the currently configured default gateway.
2. Define the fields.
3. Click . The IP configuration fields are saved and the device is updated.
Configuring the Device Using Your Browser
FS728TP Smart Switch Software User Manual
v2.0, November 2006
5-76