NETGEAR ProSafe FS728TP Software User Manual page 93

Aggregating Ports
The LAG Settings Page contains fields for configuring parameters for configured LAGs. The
system supports up to 8 LAGs, and each LAG can contain up to 8 ports.
To define LAG parameters:
1. Click Switch > LAG Configuration > LAG Settings. The LAG Settings Page opens:
Figure 5-41
The LAG Settings Page contains the following fields:
– Interface – Displays the LAG number.
– LAG Description – Displays the user-defined port name.
– Link Status – Displays the link operation. The possible field values are:
– UP – Indicates the LAG is currently linked and forwarding traffic.
– Down – Indicates the LAG is currently not linked.
– LAG Speed – Displays the configured rate for the LAG. The port type determines what
speed setting options are available. LAG speeds can only be configured when auto
negotiation is disabled. The possible field values are:
Configuring the Device Using Your Browser
FS728TP Smart Switch Software User Manual
v2.0, November 2006
5-60