Viewing The Device Information - NETGEAR ProSafe FS728TP Software User Manual

FS728TP Smart Switch Software User Manual

Viewing the Device Information

The contains parameters for configuring general device information, including the system name,
location, contact, System Object ID, System Up Time and Base MAC Addresses, and both
software and hardware versions.
1. Click System > Switch Status. The Switch Status Page opens:
Figure 5-15
The Switch Status Page contains the following fields:
– System Name – Defines the user-defined device name. The field may contain 0-160
characters.
– System Location – Defines the location where the system is currently running. The field
may contain 0-160 characters.
– System Contact – Defines the name of the contact person. The field may contain 0-160
characters.
– System Object ID – Displays the vendor's authoritative identification of the network
management subsystem contained in the entity.
5-9 Configuring the Device Using Your Browser
v2.0, November 2006