FS728TP Smart Switch Software User Manual
1. Click Switch > Statistics/RMON > RMON History > History Control. The History Control
Page opens:
Figure 5-92
The History Control Page contains the following fields:
–
History Entry No. – Displays the entry number for the History Control Table page.
–
Source Interface – Displays the interface from which the history samples were taken. The
possible field values are:
–
Port – Specifies the port from which the RMON information was taken.
–
LAG – Specifies the LAG from which the RMON information was taken.
–
Sampling Interval – Indicates in seconds the time that samples are taken from the ports.
The field range is 1-3600. The default is 1800 seconds (equal to 30 minutes).
–
Sampling Requested – Displays the number of samples to be saved. The field range is 1-
65535. The default value is 50.
–
Current Number of Samples – Displays the current number of samples taken.
–
Owner – Displays the RMON station or user that requested the RMON information. The
field range is 0-20 characters.
5-141
Configuring the Device Using Your Browser
v2.0, November 2006