Configuring System Time - NETGEAR ProSafe FS728TP Software User Manual

– Date – Displays the current date.
– Local Time – Displays the Local time.
– System Up Time – Displays the amount of time since the most recent device reset. The
system time is displayed in the following format: Days, Hours, Minutes, and Seconds. For
example, 41 days, 2 hours, 22 minutes and 15 seconds.
– Idle Timeout (Min) – Indicates the amount of time (minutes) that elapses before an idle
station is timed out. Idle stations that are timed out must login to the system. The field
range is 5 - 30 minutes. The field default value is 5 minutes.
– Base MAC Address – Displays the MAC address.
– Serial Number – Displays the device serial number.
– Model Number – Displays the device model number and name.
– Hardware Version – Displays the installed device hardware version number.
– Boot Version – Displays the current boot version running on the device.
– Software Version – Displays the installed software version number.
2. Define the fields.
3. Click .

Configuring System Time

The Time Page contains fields for defining system time parameters for both the local hardware
clock and the external SNTP clock. If the system time is kept using an external SNTP clock, and
the external SNTP clock fails, the system time reverts to the local hardware clock.
1. Click Switch > Time. The Time Page opens:
Configuring the Device Using Your Browser
FS728TP Smart Switch Software User Manual
v2.0, November 2006
5-10