–
SNMPv3 Notification Recipient
SNMPv1, 2c Notification Recipient
The SNMP v1, v2c Recipient table contains the following fields:
–
ID – Indicates the SNMP table entry number.
–
Recipients IP – Displays the IP address to which the traps are sent.
–
Notification Type – Displays the notification sent. The possible field values are:
–
Trap – Indicates traps are sent.
–
Inform – Indicates informs are sent.
–
Community String – Displays the community string of the trap manager.
–
Notification Version – Displays the trap type. The possible field values are:
–
SNMP V1 – Indicates that SNMP Version 1 traps are sent.
–
SNMP V2c – Indicates that SNMP Version 2 traps are sent.
–
UDP Port – Displays the UDP port used to send notifications. The default is 162.
–
Filter Name – Indicates if the SNMP filter for which the SNMP Notification filter is
defined.
–
Timeout – Indicates the amount of time (in seconds) the device waits before re-sending
informs. The default is 15 seconds.
–
Retries – Indicates the amount of times the device re-sends an inform request. The default
is 3 seconds.
–
Delete – Removes the currently selected recipient. The possible field values are:
–
Checked – Removes the selected recipient from the list of recipients.
–
Unchecked – Maintains the list of recipients.
SNMPv3 Notification Recipient
The SNMPv3 Notification Recipient table contains the following fields:
–
ID – Indicates the SNMP table entry number.
–
Recipient IP – Displays the IP address to which the traps are sent.
–
Notification Type – Displays the type of notification sent. The possible field values are:
–
Trap – Indicates that traps are sent.
Configuring the Device Using Your Browser
FS728TP Smart Switch Software User Manual
v2.0, November 2006
5-112