Getting Started; Network With Dhcp Server - NETGEAR ProSafe FS728TP Software User Manual

FS728TP Smart Switch Software User Manual
Chapter 2

Getting Started

This chapter walks you through the steps to start managing your FS728TP switch. This chapter
covers how to get started in a network with a DHCP server (most common) as well as in a network
that does not have a DHCP server.

Network with DHCP server

1. Connect the FS728TP switch to a DHCP network.
2. Power on the FS728TP switch by plugging in a power cord.
3. Install the Smartwizard Discovery program on your computer.
4. Start the Smartwizard Discovery program. (Chapter 3 has detailed instructions on the
Smartwizard Discovery).
5. Click Discover for the Smartwizard Discovery to find your FS728TP switch.
2-1 Getting Started
v3.0, November 2006