Installing The Windows Driver (Serial/Ip); General Information; Log In; Welcome Page - HMS Anybus Serial Server User Manual

Installing the Windows Driver (Serial/IP)

General Information

To be able to use the Serial Server you need to install the Serial/IP driver on a PC. For installation in-
structions, consult the "Serial/IP Quick Start" available at the HMS website ('www.anybus.com').

Log In

Open a web browser (e.g. Internet Explorer) and enter the IP address you have set on the Serial Server
unit with the Anybus IPconfig utility.
Example:
If you entered the address 10.10.10.83 then you should enter the text below in the address field
of the browser and press enter:
http://10.10.10.83
Now you should see the login screen (see fig-
ure). To be able to configure the serial server
you should enter "admin" in the user name
box. The default password is "admin". You
can later change the default password to some-
thing else. This will be described later in the
section "Admin".
Note: If you have problems to log in and you
are sure that your password is correct, make
sure that Caps Lock is not enabled on your
keyboard.

Welcome Page

The welcome page of the Serial Server.
Configuration 2-3