What Else Do I Need - Juniper Day One+ MX304 Manual

• SFP transceiver dust cover and QSFP transceiver dust cover
• An electrostatic discharge (ESD) grounding strap
• Grounding lug (Panduit LCD6-14A-L or equivalent) and screws

What Else Do I Need?

• Someone to help you secure the router to the rack
• Phillips (+) screwdrivers, numbers 1 and 2
• Management host such as a laptop or desktop PC
• Serial-to-USB adapter (if your laptop or desktop PC doesn't have a serial port)
• Grounding cable #6 AWG (4.11 mm²) stranded wire
Install the MX304 Router in a Four-Post Rack
Here's how to install the router in a four-post rack or a cabinet:
CAUTION: If you're installing more than one router in a rack, install them from the bottom up.
CAUTION: Before front-mounting the router in a rack, have a qualified technician verify that the rack is
strong enough to support the router's weight and is adequately supported at the installation site.
CAUTION: Lifting the chassis and mounting it in a rack requires two people (one person to hold the
router in place and a second person to install the screws). A fully loaded AC-powered router weighs up
to 70.54 lb (32 kg).
1. Review the General Safety Guidelines and
2. Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the other end to a site
ESD point.
Warnings.
3