Table of Contents
Advertisement
REMKO MWL series
10
Commissioning
Internet version
EC-1 version
Touch display version
Touch display and information on commis-
sioning
The Smart Control is used to operate and control
the entire heating system. The Smart Control is
operated via the touch display.
n
The unit is pre-installed at the factory. After a
reset of the Smart Control, the default parame-
ters are loaded.
An intensive visual inspection is to be carried
n
out before the actual commissioning.
n
Switch on the power supply.
NOTICE!
Before commissioning the entire system,
including hot water tank, must be filled!
52
11
Care and maintenance
Regular care and maintenance assure fault-free
operation and long service life for the heat pump
system.
n
The unit must be kept free of dirt, growth and
other deposits.
n
The unit is to be cleaned with a damp cloth. In
doing so, ensure that no caustic, abrasive or
solvent-based cleaning products are used. Use
of powerful water jets is to be avoided.
n
The air filters of the ventilation module must be
cleaned.
n
Plan for air bleed valves and drain-off taps at
appropriate places if necessary
Advertisement
Table of Contents
