Table of Contents
Advertisement
REMKO MWL series
REMKO heat pumps as source heat generators
n
SQW 400, LWM or HTS series as a possible powerful option for heating larger buildings, e.g. apartment
buildings.
Since heat pumps are limited in both end temperature and power (peak load), the overall system of the
n
MWL 35 Modular Residential Heat Pump is an excellent solution to this challenge.
n
This is a 2-pipe system that is fed constantly at 20 °C from a source buffer tank.
n
The source heat pump is operated in monoenergetic design.
n
The continuous operation of the built-in heating cycle pump ensures that a constant temperature of the
source heating water is present at the inlet of the MWL 35 modular residential heat pump.
n
The MWL 35 can thus realise higher hot water temperatures (with e.g. 45 °C) with a comparatively low
energy expenditure. User-defined hot water temperatures can be conveniently programmed via the heat
pump manager.
The following table shows an initial overview of which REMKO heat pumps can be used as source heat gen-
erators - depending on the installed MWL 35.
Example: For 10 residential units and thus 10 installed MWL 35 heat pumps, a WKF 130 Duo would be
selected as the source heat pump.
Source heat pump type
WKF 80
WKF 100
WKF 130
WKF 170
WKF 130 Duo
WKF 170 Duo
LWM 80
LWM 110
LWM 150
LWM 110 Duo
LWM 150 Duo
HTS 80
HTS 110
HTS 90
HTS 130
HTS 200
HTS 260
HTS 200 Duo
HTS 260 Duo
20
Heating application
area
6,00
9,00
12,00
16,00
24,00
32,00
7.00
10.00
13.00
20.00
26.00
7.00
11.00
8.00
13.00
18.00
23.00
36.00
46.00
MWL 35 Q20/W40
heating capacity
2,5
Max. MWL 35 to be
connected
3
4
5
6
9
13
3
4
5
8
10
3
4
3
5
7
9
14
18
Advertisement
Table of Contents
