REMKO MWL Series Operating And Installation Instructions page 38

REMKO MWL series
NOTICE!
Heat pump systems and components from REMKO must be filled and operated with deionised water
(completely desalinated). We also recommend the use of the complete heating protection unit available
from us. Full protection with glycol should be used in cooling systems. The system water should be tested
each time the plant is serviced, but at least once a year. Damage that results from non-compliance is not
covered by the guarantee. Below you will find a suitable form for documenting the filling of the system.
Filling of heating system with
completely deionised water
Filled on
System volume
[litres]
°dH value
pH value
Conductivity
[µS/cm]
Conditioning agent
(name and quantity)
Molybdenum
content [mg/l]
Signature
Your heating contractor:
Fig. 46: Form for logging filling with completely deionised water
38
Initial filling Year 2 Year 3 Year 4
i v e 2 0 3 5
i v e 2 0 3 5
V D I d i r e c t
V D I d i r e c t
n n u a l
n n u a l
P e r f o r m a
P e r f o r m a
a s u r e m e n t
a s u r e m e n t
c o n t r o l m e
c o n t r o l m e
!
!