REMKO MWL Series Operating And Installation Instructions page 28

Modular residential heat pump

Table of Contents

REMKO MWL series

Now insert the drinking water storage module into

the frame.

Fig. 18

The MWL has now reached the status as shown in

figure Fig. 19.

Fig. 19

Please ensure that the position of the storage tank

allows for a problem-free screwed connection to

the frame by exactly overlapping the steel eyelets

and the rivet nut.

Fig. 20

Now connect the existing pipes to the drinking

water storage tank module. Make sure that all flat

sealed connections are made with the seals sup-

plied.

Fig. 21

A black connection pipe is located centrally under

the condensate tray. Ensure on site that the liquid

is led to a funnel siphon / sewer connection via the

connection pipe. For reasons of hygiene, we rec-

ommend using our barrier fluid, which prevents the

tub from drying out and thus prevents unpleasant

odours.

Fig. 22

Table of Contents

Mwl 35