Table of Contents
Advertisement
Chapter 7. Test Menu
NETWORK TESTS
TEST
RUN SELFTEST
PORT TESTS
Network Tests
Network tests are used to control the activation of loopbacks and the
initiation of data test patterns.
The network tests are run on the network interface (NI). Three differ-
ent test configurations can be selected to determine the type of loop-
back and the pattern to run. Test results are displayed in the LCD
window. See Figure 7-2 on page 7-3.
7-2
LOCAL LOOPBK
REMOTE LOOPBK
TEST PATTERN
CLR ERRS (and error display)
INSERT 511 ERRRORS
DTE LOOPBK: OFF
DATA LOOPBK: OFF
Figure 7-1. Test Menu Tree
TSU ACE User Manual
NO LOOPBACK
LINE ON
PAYLOAD ON
NO PATTERN
1:8 ALL DS0s
511 ACT. DS0s
QRSS ACT. DS0s
ALL ZEROS
ALL ONES
(Displays results)
NO LOOPBACK
V.54 INBAND PLB
ANSI FDL LLB
AT&T INBAND LLB
ANSI FDL PLB
AT&T PLB
61200295L1-20
Advertisement
Table of Contents
