Lighting - ECD SmartDRY SD Series Setup And Operation Manual

9.3.6 LIGHTING

There are three automatic lighting controls that can be set or disabled: the Door switch Status and yellow to
green threshold. With the Door switch set to yes, the white interior LEDs will automatically turn on when the
door is open. Set to no, and the door switch will no longer cause the white interior LEDs to turn on when the
door is opened. With the Status set to yes, the current status of the cabinet is shown by the LEDs in the inte-
rior lighting. Set to no, and the interior LEDs no longer show the current cabinet status.
YELLOW TO GREEN THRESHOLD SETS THE RH LEVEL ABOVE THAT SET POINT. STATUS LIGHTS
CHANGE FROM YELLOW TO GREEN WHERE RH VALUE EXCEEDS SET POINT AFTER THE DOOR WAS
OPENED.
To access the Lighting Settings:
1) From the Main Display, enter the Main menu by pressing the Menu button. Enter the Other Settings
menu by pressing the Settings button.
2) Enter the Lighting Settings by pressing the Lighting button. Edit the desired settings selecting the OK
button to accept each edited value..
SD Series Dry Cabinets Setup and Operation Manual | A55-7379-00 Rev: 2.0.0 Page 51