Date/Time - ECD SmartDRY SD Series Setup And Operation Manual

9.3.2 DATE/TIME

The date and time was set at the factory and is maintained by a battery backup. For proper time display on the
graph view, the time zone and daylight savings time mode can be set for your location. You can also select 12
or 24 hour time format.
To access the Date/Time Menu:
1) From the Main Display, enter the Main menu by pressing the Menu button. Enter the Other Settings
menu by pressing the Settings button.
3) Enter the Date/Time Settings menu by pressing the Date button. Edit the desired settings selecting the
OK button to accept each edited value.
SD Series Dry Cabinets Setup and Operation Manual | A55-7379-00 Rev: 2.0.0 Page 47