Receiving And Inspection; Inspection; Loss Or Damage; Shipping Materials - ECD SmartDRY SD Series Setup And Operation Manual

2.0 RECEIVING AND INSPECTION

Your satisfaction and safety require a complete understanding of the SmartDRY™ Cabinet, including its proper
function and operation. Be sure operators are given adequate training before attempting to put the cabinet in
service.
This equipment must be used only for its intended application; any alterations or modifications
will void your warranty.

2.1 INSPECTION

The carrier, when accepting shipment, also accepts responsibility for safe delivery and is liable for loss or dam-
age claims. On delivery, inspect for visible exterior damage. Note and describe on the freight bill any damage
found and enter your claim on the form supplied by the carrier.

2.2 LOSS OR DAMAGE

Inspect for concealed loss or damage on the cabinet itself, both interior and exterior. If any, the carrier will
arrange for official inspection to substantiate your claim.

2.3 SHIPPING MATERIALS

Save the shipping crate until you are sure the unit has been delivered in good condition.

2.4 RETURN SHIPMENT

If for any reason you must return the unit, contact ECD for a Return Materials Authorization (RMA). Be pre-
pared to supply the Model Number and Serial number located on the Serial number label when requesting an
11.0 Service & Troubleshooting
RMA. Please refer to
www.ecd.com.

2.5 ACCESSORIES

Verify all of the equipment indicated on the packing list is included with the unit. Carefully check all packaging
before discarding.
SD Series Dry Cabinets Setup and Operation Manual | A55-7379-00 Rev: 2.0.0
IMPORTANT: READ THIS MANUAL IMMEDIATELY.
for information for contact information or visit
Page 8