Keywish Hummer-Bot-2.0 Instruction Manual page 79

3, Copying the following program to IDE (you can also directly open the matching program in the CD), and
downloading to the development board, pulled out the transparent plastic sheet marked as "1" in the
Fig.3.2.33. Then opening the serial port monitor, observing and recording the values on it while pressing
keys on the remote control towards the receiving head as shown in Fig.3.2.38.
Program flow chart is as follows:
Code Path : "hummer-bot\Lesson\ModuleDemo\IrkeyPressed\ IrkeyPressed.ino"
76