Table of Contents
Advertisement
Figure 2.1.12 Arduino IDE Interface
2.There are 5 menus on the menu bar, but we mainly introduce File and Tools. Click File, the interface as
shown in Figure 2.1.13 will be displayed, you can see the Examples and Preference options. The Examples
are some of the Arduino's own programs, these are compiled without errors, the normal use of the program,
a great help for beginners. The Preference option, It's mainly about the parameter settings, such as language,
fonts and so on.
Figure 2.1.13 File Menu Bar Options
3、Click Tools, the interface shown in Figure 2.1.14 will pop up. Here we can see two options: Board and
Port. In the board option, we can see the commonly used Arduino development board model, we only need
to choose according to their own development board. In the Port option, the USB serial port is mainly
selected, as shown in Figure 2.1.15. If you are not sure, you can check it in the "Device Manager" and select
the corresponding COM port.
11
Advertisement
Table of Contents
