NBS Technologies Javelin DNA User Manual page 37

3) Connected to a PC
1. Open cover, remove ribbon and all cards and close the cover.
2. Go to "Control Panel → Hardware and Sound → Devices and Printers"
and right-click the "NBS Technologies Javelin Driver" driver icon. Then,
select "Printing preferences".
3. Go to "Card Printer Printing preferences → Control" and click
"Self-Cleaning".
4. Insert a cleaning card when prompted by the "Insert a cleaning card"
message, and then click "Yes".
5. The cleaning card will be ejected after it moves back and forth 10 times.
6. Do not use the printer for 2-3 minutes until the alcohol solution is
fully dried.
72
③ Clean the Printer Using Alcohol Swab
You can clean the printer's TPH and sensor and wipe the ink and dusts using
an alcohol swab.
Do not use any liquid/gel containing a high content of alcohol or solvent to clean
the printer as it may cause discoloration or fissure on its surface. Make sure to use
Caution
authorized alcohol swabs only.
1) Clean the Inside of the Printer Using Alcohol Swab
1. Open the Top Cover and remove the ribbon. Press the "EJECT" button located
in front of the printer to eject any card inside the printer.
2. Turn off the printer connected to a PC, and unplug the power adapter.
3. Then, clean places in the printer where you cannot reach with your
hands.
Do not use the printer for 2-3 minutes
Caution
until the alcohol solution is fully dried.
73
JAVELIN DNA User Guide Manual