NBS Technologies Javelin DNA User Manual page 34

6. The printing progress is indicated on the LCD display. The card will be
ejected when the printing is completed.
SELF PRINTING
7. When the "SELF PRINTING DONE" message displays, hold down both the
"EJECT" and "RIBBON SET" buttons to go back to the "DIAGNOSIS-SELF PRINT
MODE" mode. To go into STAND-BY mode, hold down the "EJECT" button.
SELF PRINTING MODE
66
SELF PRINTING DONE
STAND-BY MODE
Maintenance Instructions
-Supported Cards
This card printer may not support certain types of PVC cards.
Please use the following PVC cards to prevent any issues and achieve the
highest printing quality.
① Size
- International Standard (ISO CR80-ISO7810)
- 53.98mm (W) x 85.60mm (L)/3.375"x2.215"
② Thickness
- Minimum: 0.4mm
- Standard: 0.76mm
- Maximum: 1.2mm
③ Acceptable Cards
- Glossy white
- Free of dirt or grease
- Not contaminated
- Free of scratches or dents
- Completely flat
- Static free
④ Unacceptable Cards
- Heavily damaged
- Stained or contaminated
- Scratched
- Bent or deformed
- Embossed
Clean the Printer
-Clean the Exterior
- Clean the printer with a soft, damp cloth. Make sure to unplug the power
adapter before cleaning it.
- Do not allow any liquid to drip inside the printer.
- Make sure that the printer is dry before turning it on.
Do not use any liquid/gel containing a high content of alcohol or solvent to clean
Caution
the printer as it may cause discoloration or fissure on its surface.
Caution
Do not load or use cards considered as
unacceptable as they may damage the parts
including the head, sensor, TPH, and roller.
67
JAVELIN DNA User Guide Manual